Junior Member
If you are looking for more details, kindly visit sunlight readable monitor.
Posts: 21Threads: 0Joined: Oct Reputation: 3
#11(-10-09, 04:11 PM)
Jodel Wrote: Hi,
I notice various threads in the past on trying to get an affordable sunlight readable display ( at a reasonable price! )
Has anyone cracked that problem yet?
Jodel
Hi Jodel, I have recently purchased a Digiwave HA-101ZIEBCAD1-V 10.1 inch projected capacitive touch x800 HDMI LCD screen which cost around £220 with UK VAT and import duties (Thanks Brexit) I think you can buy the same screen without UK taxes for around £160. It has a bonded screen and is daylight readable at Nits. It's actually so bright it almost hurts to look at it. It definitely works in bright sunlight. It will run on a Pi fine using the HDMI port but also make sure you buy the non-standard Digiwave USB lead for it as one end is a tiny connector that fits on the screens control circuit board. the other end is a standard USB connector and plugs into the Pi to enable touch. The USB lead is around £6. I am now trying to write a brightness slider control app for it that uses the GPIO PWM Pin 18. It works but when you close the slider the GPIO goes to zero and the backlight turns off. So if anyone knows how to keep the GPIO Pin 18 at the last set value until the Pi is powered down I would be glad to learn from them and happy to share the code for this very nice screen.
Find
Reply
JodelMember
Posts: 66Threads: 19Joined: Nov Reputation: 0
#12(-11-20, 07:46 PM)
Hillzzz Wrote:(-10-09, 04:11 PM)
Jodel Wrote: Hi,
I notice various threads in the past on trying to get an affordable sunlight readable display ( at a reasonable price! )
Has anyone cracked that problem yet?
Jodel
Hi Jodel, I have recently purchased a Digiwave HA-101ZIEBCAD1-V 10.1 inch projected capacitive touch x800 HDMI LCD screen which cost around £220 with UK VAT and import duties (Thanks Brexit ) I think you can buy the same screen without UK taxes for around £160. It has a bonded screen and is daylight readable at Nits. It's actually so bright it almost hurts to look at it. It definitely works in bright sunlight. It will run on a Pi fine using the HDMI port but also make sure you buy the non-standard Digiwave USB lead for it as one end is a tiny connector that fits on the screens control circuit board. the other end is a standard USB connector and plugs into the Pi to enable touch. The USB lead is around £6. I am now trying to write a brightness slider control app for it that uses the GPIO PWM Pin 18. It works but when you close the slider the GPIO goes to zero and the backlight turns off. So if anyone knows how to keep the GPIO Pin 18 at the last set value until the Pi is powered down I would be glad to learn from them and happy to share the code for this very nice screen.
Hi Hillzzz,I googled "Digiwave HA-101ZIEBCAD1-V 10.1" and couldn't find it. Where did you buy it?Jodel
Find
Reply
TechstyleSenior Member
Posts: 332Threads: 34Joined: Oct Reputation: 30
#13Funny, I posted on this thread back in , saying I didn&#;t have a screen like that. Then in November , I bought a 15.6&#;, P, sunlight readable (nit), optically bonded, anti glare, IP67 waterproof, touchscreen with an external dimmer. I just published a 2 year update on YT:
Regards,Jason
Find
Reply
SARASTROJunior Member
Posts: 20Threads: 3Joined: Jan Reputation: 3
#14
I can recommend the Sihovision. You can see it in the thread "7" REMOTE WATERPROOF DISPLAY". After near three years of outdoor use, is working perfectly
They have a wide range of models.
Find
Reply
HillzzzJunior Member
Posts: 21Threads: 0Joined: Oct Reputation: 3
#15(-11-20, 08:10 PM)
Jodel Wrote:(-11-20, 07:46 PM)
Hillzzz Wrote:(-10-09, 04:11 PM)
Jodel Wrote: Hi,
I notice various threads in the past on trying to get an affordable sunlight readable display ( at a reasonable price! )
Has anyone cracked that problem yet?
Jodel
Hi Jodel, I have recently purchased a Digiwave HA-101ZIEBCAD1-V 10.1 inch projected capacitive touch x800 HDMI LCD screen which cost around £220 with UK VAT and import duties (Thanks Brexit ) I think you can buy the same screen without UK taxes for around £160. It has a bonded screen and is daylight readable at Nits. It's actually so bright it almost hurts to look at it. It definitely works in bright sunlight. It will run on a Pi fine using the HDMI port but also make sure you buy the non-standard Digiwave USB lead for it as one end is a tiny connector that fits on the screens control circuit board. the other end is a standard USB connector and plugs into the Pi to enable touch. The USB lead is around £6. I am now trying to write a brightness slider control app for it that uses the GPIO PWM Pin 18. It works but when you close the slider the GPIO goes to zero and the backlight turns off. So if anyone knows how to keep the GPIO Pin 18 at the last set value until the Pi is powered down I would be glad to learn from them and happy to share the code for this very nice screen.
Hi Hillzzz,
I googled "Digiwave HA-101ZIEBCAD1-V 10.1" and couldn't find it. Where did you buy it?
Jodel
Hi Jodel you can find it here https://www.soselectronic.com/en/product...1-v-
Find
Reply
EarlWerJunior Member
Posts: 8Threads: 1Joined: Feb Reputation: 0
#16I bought a 10" touchscreen from https://www.touchtecs.com/ Contact is Size 10.1"Display Resolution & Aspect Ratio *800(16:10)Touch Type Capacitive (Resistive Touch , Non-touch optional)Contrast Ratio 600:1Brightness (CD/&#;) 800 nits (Can customized up to nits)Viewing Angles (CR =10) 85/85/85/85 (L/R/U/D)Response Time(Typ.Tr+Tf) 6.5msMain I/O Interfaces 1*DC (12-36V)1*HDMI, Max support P1*VGA1*DVI1*RJ45 Touch Interface (defined as USB), connected with capacitive & resistive Touch1*AudioOperating Temperature Wide -20~70&#;Storage Temperature -20~70&#;I added the extra brightness option.From the supplier: "the high brightness monitor that you bought is the upgrade version (including high brightness & photosenstive function switch key, Industrial Terminal )"Came with cables and 12v power adapter.You will need a HDMI to micro-HDMI for the RPi.Since the RPi and Touchscreen will be powered by the Sailboat 12v battery, I need to make a cable w/switch to replace the 115v Power Supply.I just need a single 12v because the MacArthur Hat Power Board will take 12v and power the RPi.If you don't have the MacArthur Hat & Power board, you will need 5v for the RP1 and 12v for the Touchscreen.It also has VESA mounting holes.It was not cheap after adding exchange, shipping & customs from China to Canada.I bought 2 but the project was delayed as I worked on my boat... One of them is still unopened ;-)I'm pretty sure this is the model:If you pauer, mention the sailboat application. I don't get any commission, I'm just trying to reduce the frustrating back-and-forth to communicate.
Find
Reply
fjjJunior Member
If you want to learn more, please visit our website tablet with infrared thermometer.
Posts: 10Threads: 1Joined: Mar Reputation: 1
#17(-11-20, 10:05 PM)
Hillzzz Wrote:(-11-20, 08:10 PM)
Jodel Wrote:(-11-20, 07:46 PM)
Hillzzz Wrote:(-10-09, 04:11 PM)
Jodel Wrote: Hi,
I notice various threads in the past on trying to get an affordable sunlight readable display ( at a reasonable price! )
Has anyone cracked that problem yet?
Jodel
Hi Jodel, I have recently purchased a Digiwave HA-101ZIEBCAD1-V 10.1 inch projected capacitive touch x800 HDMI LCD screen which cost around £220 with UK VAT and import duties (Thanks Brexit ) I think you can buy the same screen without UK taxes for around £160. It has a bonded screen and is daylight readable at Nits. It's actually so bright it almost hurts to look at it. It definitely works in bright sunlight. It will run on a Pi fine using the HDMI port but also make sure you buy the non-standard Digiwave USB lead for it as one end is a tiny connector that fits on the screens control circuit board. the other end is a standard USB connector and plugs into the Pi to enable touch. The USB lead is around £6. I am now trying to write a brightness slider control app for it that uses the GPIO PWM Pin 18. It works but when you close the slider the GPIO goes to zero and the backlight turns off. So if anyone knows how to keep the GPIO Pin 18 at the last set value until the Pi is powered down I would be glad to learn from them and happy to share the code for this very nice screen.
Hi Hillzzz,
I googled "Digiwave HA-101ZIEBCAD1-V 10.1" and couldn't find it. Where did you buy it?
Jodel
Hi Jodel you can find it here https://www.soselectronic.com/en/product...1-v-
Hi Hillzzz,Did you ever find an answer to the dimmer issue? I've just ordered the screen and would love to set up external dimmer control.Thanks,Fraser
Find
Reply
HillzzzJunior Member
Posts: 21Threads: 0Joined: Oct Reputation: 3
#18(-03-20, 01:19 PM)
fjj Wrote:(-11-20, 10:05 PM)
Hillzzz Wrote:(-11-20, 08:10 PM)
Jodel Wrote:(-11-20, 07:46 PM)
Hillzzz Wrote:(-10-09, 04:11 PM)
Jodel Wrote: Hi,
I notice various threads in the past on trying to get an affordable sunlight readable display ( at a reasonable price! )
Has anyone cracked that problem yet?
Jodel
Hi Jodel, I have recently purchased a Digiwave HA-101ZIEBCAD1-V 10.1 inch projected capacitive touch x800 HDMI LCD screen which cost around £220 with UK VAT and import duties (Thanks Brexit ) I think you can buy the same screen without UK taxes for around £160. It has a bonded screen and is daylight readable at Nits. It's actually so bright it almost hurts to look at it. It definitely works in bright sunlight. It will run on a Pi fine using the HDMI port but also make sure you buy the non-standard Digiwave USB lead for it as one end is a tiny connector that fits on the screens control circuit board. the other end is a standard USB connector and plugs into the Pi to enable touch. The USB lead is around £6. I am now trying to write a brightness slider control app for it that uses the GPIO PWM Pin 18. It works but when you close the slider the GPIO goes to zero and the backlight turns off. So if anyone knows how to keep the GPIO Pin 18 at the last set value until the Pi is powered down I would be glad to learn from them and happy to share the code for this very nice screen.
Hi Hillzzz,
I googled "Digiwave HA-101ZIEBCAD1-V 10.1" and couldn't find it. Where did you buy it?
Jodel
Hi Jodel you can find it here https://www.soselectronic.com/en/product...1-v-
Hi Hillzzz,
Did you ever find an answer to the dimmer issue? I've just ordered the screen and would love to set up external dimmer control.
Thanks,
Fraser
Hi Fraser, If it's an external dimmer you want like a potentiometer knob style dimmer then all you need is a simple circuit that goes from zero to 3 volts with a potentiometer to control the voltage. If you look at the PDF circuit specs you will see the connector which controls brightness. I want to do it in software and i haven't found a solution yet. Cheers, H.
Find
Reply
fjjJunior Member
Posts: 10Threads: 1Joined: Mar Reputation: 1
#19(-03-20, 06:42 PM)
Hillzzz Wrote:(-03-20, 01:19 PM)
fjj Wrote:(-11-20, 10:05 PM)
Hillzzz Wrote:(-11-20, 08:10 PM)
Jodel Wrote:(-11-20, 07:46 PM)
Hillzzz Wrote: Hi Jodel, I have recently purchased a Digiwave HA-101ZIEBCAD1-V 10.1 inch projected capacitive touch x800 HDMI LCD screen which cost around £220 with UK VAT and import duties (Thanks Brexit ) I think you can buy the same screen without UK taxes for around £160. It has a bonded screen and is daylight readable at Nits. It's actually so bright it almost hurts to look at it. It definitely works in bright sunlight. It will run on a Pi fine using the HDMI port but also make sure you buy the non-standard Digiwave USB lead for it as one end is a tiny connector that fits on the screens control circuit board. the other end is a standard USB connector and plugs into the Pi to enable touch. The USB lead is around £6. I am now trying to write a brightness slider control app for it that uses the GPIO PWM Pin 18. It works but when you close the slider the GPIO goes to zero and the backlight turns off. So if anyone knows how to keep the GPIO Pin 18 at the last set value until the Pi is powered down I would be glad to learn from them and happy to share the code for this very nice screen.
Hi Hillzzz,
I googled "Digiwave HA-101ZIEBCAD1-V 10.1" and couldn't find it. Where did you buy it?
Jodel
Hi Jodel you can find it here https://www.soselectronic.com/en/product...1-v-
Hi Hillzzz,
Did you ever find an answer to the dimmer issue? I've just ordered the screen and would love to set up external dimmer control.
Thanks,
Fraser
Hi Fraser, If it's an external dimmer you want like a potentiometer knob style dimmer then all you need is a simple circuit that goes from zero to 3 volts with a potentiometer to control the voltage. If you look at the PDF circuit specs you will see the connector which controls brightness. I want to do it in software and i haven't found a solution yet. Cheers, H.
Hi Hillzzz,I was looking at software control too. I came across two issues - the one that you mentioned with the brightness going to zero after quitting the app, and another where there was terrible flicker at lower brightness levels. I resolved the flicker issue using PIGPIO, as it uses hardware PWM timing. It should also resolve your issue as there is a daemon that runs, so the setting should stay on until the power is off. I've implemented a service to listen for the GUI app and change the PWM duty cycle. I've just got a very basic Python tkinter slider to change the brightness. The service starts on boot using systemd.I'm essentially building a self-contained plotter for use in the open cockpit, so far this screen is looking great.Thanks,Fraser
Find
Reply
HillzzzJunior Member
Posts: 21Threads: 0Joined: Oct Reputation: 3
#20(-03-26, 02:44 PM)
fjj Wrote:(-03-20, 06:42 PM)
Hillzzz Wrote:(-03-20, 01:19 PM)
fjj Wrote:(-11-20, 10:05 PM)
Hillzzz Wrote:(-11-20, 08:10 PM)
Jodel Wrote: Hi Hillzzz,
I googled "Digiwave HA-101ZIEBCAD1-V 10.1" and couldn't find it. Where did you buy it?
Jodel
Hi Jodel you can find it here https://www.soselectronic.com/en/product...1-v-
Hi Hillzzz,
Did you ever find an answer to the dimmer issue? I've just ordered the screen and would love to set up external dimmer control.
Thanks,
Fraser
Hi Fraser, If it's an external dimmer you want like a potentiometer knob style dimmer then all you need is a simple circuit that goes from zero to 3 volts with a potentiometer to control the voltage. If you look at the PDF circuit specs you will see the connector which controls brightness. I want to do it in software and i haven't found a solution yet. Cheers, H.
Hi Hillzzz,
I was looking at software control too. I came across two issues - the one that you mentioned with the brightness going to zero after quitting the app, and another where there was terrible flicker at lower brightness levels. I resolved the flicker issue using PIGPIO, as it uses hardware PWM timing. It should also resolve your issue as there is a daemon that runs, so the setting should stay on until the power is off. I've implemented a service to listen for the GUI app and change the PWM duty cycle. I've just got a very basic Python tkinter slider to change the brightness. The service starts on boot using systemd.
I'm essentially building a self-contained plotter for use in the open cockpit, so far this screen is looking great.
Thanks,
Fraser
HI Fraser,Thats really interesting. I stopped looking at the software side for a bit because I am currently designing a 3D printed box to put the screen and Pi in that will be attached to the helm station. I looked at Navipods and similar and could not understand why a plastic box cost more than the screen and Pi together. I will shortly get ack to the software side so thanks very much for your pointers. very helpful.Thanks, Hillzzz,
Find
Reply
Are you interested in learning more about custom military lcd display? Contact us today to secure an expert consultation!