How to operate the 150V Lightning Arrester Leakage Current Tester.
1. Connect the power cable to the tester and to a power outlet.
2. Turn on the tester by pressing the power button.
3. Connect the current sensor to the tester using the provided cable.
4. Connect the ground wire to the tester and to the ground.
5. Connect the test cable to the tester and to the lightning arrester to be tested.
6. Set the test parameters using the keypad and LCD display.
7. Press the start button to begin the test.
8. Monitor the test results on the LCD display.
9. If necessary, adjust the test parameters and repeat the test.
10. When finished, turn off the tester and disconnect all cables.
Note: The 150V Lightning Arrester Leakage Current Tester is designed and calibrated to ensure accurate and reliable results. However, proper operation and maintenance are required to support that performance. Always follow the manufacturer's instructions and best practices for safe and effective use of the tester.
The company is the world’s best 150V Lightning arrester leakage current tester, 10000V DAR tester, dc dielectric test set supplier supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.