Pole lights, which are a crucial part of an outdoor street lighting system that enlightens the deficiently-lit streets to guide the vehicles. These lights guarantee security on the streets while impressively limiting the danger of tragic circumstances and accidents. Regardless of whether they're for a parking area, nation club, or a metropolitan restoration project that you're accountable for, the best lighting options are an important part of any effective outdoor upgrade.
Consider if you choose a light pole incorrectly then what was the outcome. The outcome must be resulted not only in wastage of money but also you played on the safety of others. So, in this guide, you will get to know about how to choose and what features to look for the best light poles for solar street lights.
Factors Affecting Pole Selection
When buying street lamps, buyers often pay more attention to the quality of the lamps, style or brightness, thereby ignoring the choice of light poles. Likewise, as the main component of a street light, if the quality of the light pole is not good, it will cause a lot of problems and even lay a hidden safety hazard for the future.
Low-quality light poles have problems with poor corrosion resistance, easy rusted, weak impact resistance, and poor water resistance. Not only will it cause inconvenience to daily use, but it will also shorten the service life significantly. To pursue greater profits, some unscrupulous companies mass-produce low-quality light poles, and buyers must keep their eyes open and distinguish carefully.
Features to Look for
The light pole must have the ability to offer a long service life, require little maintenance and be aesthetically satisfying. Due to the possibility of unexpected loadings and wind occasions, the light pole should also have a sufficient edge of structural capacity.
Here are some features to look for before selecting a high-quality light pole for your solar street lighting system.
Steel with high strength, strong plasticity, and good toughness, is the most mainstream material for manufacturing light poles at present. High-quality steel can even withstand strong winds of more than twelve degrees in nature. There are good quality steel as well as poor quality steel. Such steels are called non-standard steels because the production requirements do not meet national standards. When unscrupulous manufacturers produce light poles, they often use non-standard steel.
However, the thickness of non-standard steel is relatively thin. To meet the acceptance standards, unscrupulous manufacturers often increase the thickness of the light pole by spraying multiple times. The light pole produced in this way is easily shaken or deformed under strong wind. The most effective way to determine whether a light pole is up to standard is to weigh it. If you do not know the weight of the light pole, the best way is to shop around. If the weight is too light, it will be a non-standard product.
Welding is one of the important links in the processing of street lamps. Poor welding will eventually cause the light pole to break. Therefore, the welding of light poles must be strictly required. Light pole welding uses both machinery and labor. Generally, the welding after the light pole is rolled by the machine is automatic submerged arc welding, and the welding of the pole body is smooth and uniform. In the remaining local areas, the welding of the machine cannot be operated and it has to be done manually, which requires high demands on the technology. Note that the surface of a good welding process is smooth, and there are no obvious welding defects such as pores, welding knobs, undercuts, etc.
The galvanization of street lamp poles is mainly cold galvanized and hot galvanized. Both galvanization methods are for anticorrosion and prolong the service life of street lamps. However, the zinc layer of hot-dip galvanizing is tens of times thicker than that of cold-dip galvanizing, and the anti-corrosion performance is also dozens of times of cold-dip galvanizing. Learning to distinguish between cold galvanized and hot galvanized will create a favorable condition for your street lamp buying journey. Cold galvanizing is smooth and bright, and the whole workpiece is free of zinc knobs and agglomeration.
The purpose of spraying the light pole is to be beautiful and to prevent corrosion. Lamps with unclear powder coating colors are also substandard products. Therefore, regular manufacturers have a grinding process before spraying, so that the spraying is uniform and the color is purer. To understand the manufacturer's production process, you must visit the factory. Judging the quality of the light poles depends not only on the materials but also on the craftsmanship. High-quality light poles are safe and reliable, with a minimum life of 25 years. When you buy street lights, you must choose carefully and carefully accept them. Choose regular products and stay away from unscrupulous manufacturers.
After spending so much time to ensure your effort paid off, make sure it will continue to work effectively for years to come. A simple thing you have to do is select a commercial light pole made from high-quality raw material, welding coating and very importantly wind speed optimization and weather acceptance. A good manufacture street light poles won&#;t have any problem standing up to critical climate conditions like ice or temperature fluctuations. All that made up of a durable light pole with a sufficient edge of structural capacity.
Make an Informed Decision
The universe of light pole for solar street lights is huge, people have many choices but the most important thing is that the buyer must be aware of when and where you have to spend your money to get a high-quality light pole for solar street lighting system as it&#;s an essential part of it. When one will walk beneath the shadow of these astonishing and amazing pieces of light poles, they will value not just the appearance of the surroundings, but also the visibility of the range.
SOKOYO meets all the requirements of providing high-quality light poles for street lights. Not only the light poles look great but they&#;re very durable against unexpecting wind events and weather conditions. Maybe you want to have a look at SOKOYO&#;s light poles because they could be an ideal energy-efficient selection in the long run.
With competitive price and timely delivery, FAMA sincerely hope to be your supplier and partner.
Want more information on traffic light pole for sale? Feel free to contact us.